Harrison Painter: Article About Painting Moldings
Molding is a classic type of architectural element used to highlight a ceiling and make a room look larger and more impressive. Though crown molding is the most popular choice, there are other designs and styles that homeowners may add to their homes. Plaster molding typically comes in shades of white and cream, and wood molding often comes in a plain unfinished design or in a white color. Though some feel that they are stuck with those colors, a Harrison painter can apply a new coat of paint to the moldings and even repair any minor damage.
Molding often comes in long pieces that contractors cut in different lengths before installing around a ceiling. They use nails to secure each piece onto the wall. When painting existing moldings, painters will often remove each piece with a crowbar and other tools. This lets them work on one piece at a time and prevent paint splotches and other damage to the walls.
Examining the pieces for damage is the first step. Wood putty or a similar putty designed for use on plaster will cover scratches and holes. Painters can also shape the putty to hide chips in the molding. They must then buff down the putty with sandpaper. Many contractors will also wipe down each piece with a damp cloth to remove any dust leftover from the sanding.
Harrison NY painters from F&B Painting can answer any questions you have about commercial painting or wallpapering.
Though most painting techniques require the use of primer, painting moldings may not require primer. Some manufacturers use a sealant after painting or treating the pieces. Painters can simply sand down the surface and wipe away the dust to prepare it for new paint.
The biggest decision that clients need to make is on the type of paint used. Glossy paint is the most popular choice. As it has more shine and gloss than other varieties when it dries, it helps pull attention to the moldings and pull the eye up. Some homeowners may opt for a flat paint. This lets the color on the walls or ceiling pull the focus and tone down the contrast between the moldings and walls.
The molding will usually require at least two coats of paint, and the painter will let the first coat thoroughly dry before adding an additional coat. After the second coat dries, the painter can determine if a third coat is needed. Some homeowners may opt for a sealant applied to the molding. As the paint has a strong gloss or shine, sealant isn't necessarily needed.