Contact about our Scarsdale painter

Scarsdale Painter: Article About Preparing Interior Walls For Paint

F&B Painting: Experienced Painters in Scarsdale NY
F&B Painting banner

Being a painting contractor is more than just being skilled at applying color to the walls; professionals must also be competent in surface preparation. A Scarsdale painter must be able to gauge a surface's needs, such as hole repair, and estimate accurately for homeowners. Preparing the walls for paint requires several key steps for a gorgeous final product.

Although some wall preparation routines can be performed in different orders, cleaning the walls is normally a first step. Contractors need to remove oils, dust and any other debris from the walls to have a clear view of the surface. Exceptionally dirty walls could hide holes or dents, for example. The clean surface also provides better adherence for the primer paint in future steps.

Homeowners considering repainting should take a look at walls in the home and inspect them carefully. Most walls are riddled with small holes or dents that contractors must smooth out before painting. When a professional does arrive, homeowners can quickly see if a quality job is at hand as they smooth over any wall anomalies. A beautiful paint job is only possible with a flat surface.

Small holes, such as old nail holes, are quickly filled in with plaster. Contractors use a wallpaper scraper or other tool to smear plaster onto the wall in an even manner.

Painters from F&B Painting of Scarsdale NY will answer your question about wallpapering or deck maintenance.

A damp sponge is used afterward to blot the plaster, giving it a seamless look compared to the rest of the wall. They'll usually allow the plaster to dry to verify if cracks occur. If so, another plaster layer and a sponge swiping is necessary. Plaster could take several days to settle into a surface that's perfect for painting. Contractors want to ensure that it's dry and ready for paint to avoid any unsightly mistakes.

Large holes or dents require a mesh made of fiberglass or aluminum. The mesh is attached to the wall and across the hole. Contractors then fill the mesh with plaster, using it as a bridge to create a flat appearance. Plastering takes considerable time if the home has many damaged walls.

With clean and flat walls, professionals move on to taping. They'll tape around wall edges so that paint cannot escape a certain area during rolling or brushing. Tape must also be applied across crown molding at the floor and ceiling. Tarps or plastic cover the floors, requiring tape to hold them down in many cases. Windows, vents and other areas not requiring paint are also taped and covered.

Contact F&B Painting today

I look forward to speaking with you. To schedule your consultation and free estimate, fill out the below form or call us at (914) 843-5043.

Contact F&B Painting

click to call

click to submit form